Maytag MER5765RAW Benutzerhandbuch
![Maytag](https://files.manualsbrain.com/attachments/82a97c03031d6d8bf151a99d749b77a0f027b037/common/fit/150/50/3689e9de5759aea473bc3303eff2656330a2d1cfad775fad4f3849be95f6/brand_logo.jpeg)
16
Adjusting the Oven Temperature
Oven temperatures are carefully tested for accuracy at the
factory. It is normal to notice some baking or browning
differences between a new oven and an old one. As ranges
get older, the oven temperature can shift.
factory. It is normal to notice some baking or browning
differences between a new oven and an old one. As ranges
get older, the oven temperature can shift.
You may adjust the oven temperature if you think the oven is
not baking or browning correctly. To decide how much to
change the temperature, set the temperature 25° higher or
lower than your recipe recommends, then bake. The results
of the “test” should give you an idea of how much to adjust
the temperature.
not baking or browning correctly. To decide how much to
change the temperature, set the temperature 25° higher or
lower than your recipe recommends, then bake. The results
of the “test” should give you an idea of how much to adjust
the temperature.
To adjust the oven temperature:
1. Press Bake.
2. Enter 550° by pressing the More+ pad.
3. Press and hold the Bake pad for several
seconds or until 0° appears in the display.
If the oven temperature was previously adjusted, the
change will be displayed. For example, if the oven
temperature was reduced by 15° the display will show
“-15°”.
change will be displayed. For example, if the oven
temperature was reduced by 15° the display will show
“-15°”.
4. Press the More+ or Less- pad to adjust the temperature.
Each time a pad is pressed, the temperature changes by
5°. The oven temperature can be increased or decreased
by 5° to 35°.
5°. The oven temperature can be increased or decreased
by 5° to 35°.
5. The time of day will automatically reappear in the display.
You do not need to readjust the oven temperature if there
is a power failure or interruption. Broiling and cleaning
temperatures cannot be adjusted.
is a power failure or interruption. Broiling and cleaning
temperatures cannot be adjusted.
Notes:
• For best results when broiling, use a pan designed for
broiling.
• Expect broil times to increase and browning to be slightly
lighter if appliance is installed on a 208-volt circuit.
• HI is used for most broiling. Use LO broil when broiling
longer cooking foods. The lower temperature allows
food to cook to the well done stage without excessive
browning.
food to cook to the well done stage without excessive
browning.
• To change oven temperature during broiling, press the
Broil pad and then the More+ or Less- pad to switch
between LO and HI broil.
between LO and HI broil.
• Broil times may be longer when the lower broiling
temperature is selected.
• Most foods should be turned halfway through broiling
time.
3. After four seconds, the oven will start.
• BROIL will remain lit.
4. For optimum browning, preheat broil element for 3-4
minutes before adding food.
5. Place food in the oven. Leave oven door open about four
inches (the first stop).
6. Turn meat once about halfway through cooking.
7. When food is cooked, press the CANCEL
pad. Remove food and broiler pan from the
oven.
oven.
• The time of day will reappear in the display.
RACK
APPROX. TIME
APPROX. TIME
FOODS
POSITION
FIRST SIDE
SECOND SIDE
Beef
Steak, 1” thick, Medium
Steak, 1” thick, Medium
6
8 minutes
7 - 12 minutes
Well
6
10 minutes
8 - 14 minutes
Hamburgers, 3/4” thick, Well
6 or 7
9 minutes
6 - 9 minutes
Pork
Bacon
Bacon
6
6 - 10 minutes
(no turning)
Chops, 1”
6
10 - 11 minutes
12 - 14 minutes
Ham Slice
6
5 minutes
3 - 7 minutes
Poultry
LO Broil
LO Broil
Breast Halves
4
15 minutes
15 - 25 minutes
Seafood
Fish Steaks, buttered, 1” thick
Fish Steaks, buttered, 1” thick
6
10 - 15 minutes
(no turning)
Lobster Tails, 3-4 oz. each
5
7 - 10 minutes
(no turning)
Broiling Chart
Important: This chart is a suggested guide. The times may vary with the food being cooked.