Whirlpool FEP330G Benutzerhandbuch

USING YOUR RANGE

A

DJUSTING

 

THE

 

OVEN

 

TEMPERATURE

 

CONTROL

 

(

MODEL

 

FES

330

G

)

Although your new oven is properly adjusted to
provide accurate temperatures, it may cook faster
or slower than your old oven.

If you are not satisfied with the baking/roasting
results, you can change the offset temperature by
following the steps below.

NOTE: DO NOT measure oven temperature with a
thermometer. Opening the oven door will lower the
oven temperature and give you an incorrect reading.
Also, the thermometer temperature reading will
change as your oven cycles.

Press and hold CLOCK for 5 seconds.

The display will show the time of day. Then you
will see the current offset temperature, for
example “00,” if you have not already adjusted
the temperature.

Set the new offset temperature.

Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature
setting. The minus sign shows the oven will be
cooler by the displayed amount. There is no sign
in front of the number when increasing the
temperature setting.

Press CLOCK to enter the offset temperature.

How to determine the amount of
adjustment needed

The chart at the right tells you how much to adjust
the offset temperature to get the cooking results
you want. You can figure out cooking results by the
amount of browning, moistness, and rising times for
baked foods.

+10
+20
+30

-10
-20
-30

A little more
Moderately more
Much more
A little less
Moderately less
Much less