Dacor AERB30G03 Merkblatt

Dacor  ●  1440 Bridge Gate Drive, Diamond Bar, CA 91765  ●  Tel: (800) 793-0093  ●  FAX: (626) 403-3130  ●  www.Dacor.com

STEP 7:   Remove the protective plastic cover 

from the new backguard.

STEP 8:   Place the new backguard over the back 

of the range. The backguard fits over 

the exhaust duct sticking up on the 

back of the unit. Be sure to slide the 

tabs on the back of the backguard in-

side the flanges on the back of the unit.

STEP 9:  Fasten the backguard in place with the 

three (3) existing chrome plated screws.

STEP 10:  Tighten the two (2) top screws on the 

back of the side panels.

STEP 11:  Reinstall the grates.
STEP 12:  Turn on the gas at the gas supply valve.  

Connect the power cord to the electrical outlet.