Frigidaire FGES3065PF Benutzerhandbuch

The cooktop has 2 or 3 SINGLE radiant surface elements: 
the left rear position, the right rear position. The left rear 
element may also be used with the Bridge element.

1. Place correctly sized cookware on the radiant surface 

element.

2. Push in and turn the surface control knob in either 

direction to the desired setting (See 

). Start most 

cooking operations on a higher setting and then turn to 
a lower setting to finish cooking. Each surface element 
provides a constant amount of heat at each setting. A 
glowing red surface heating area extending beyond the 
bottom edge of the cookware indicates the cookware is 
too small for the surface heating area.

3. When cooking has completed, turn the surface control 

knob to OFF before removing the cookware.

Radiant surface elements may appear to have cooled 
after they have been turned off. HE (Hot Element) 
message (Models B & C) or the hot surface indicator light 
(Model A) will turn on and will continue to glow until the 
glass cooktop has cooled down to a moderate level. The 
glass surface may still be hot and burns may occur if the 
glass surface is touched before the indicator light has 
turned OFF. The message may remain on even though 
the controls are turned OFF.

Do not place plastic items such as salt and pepper 
shakers, spoon holders or plastic wrappings on top of the 
range when it is in use. These items could melt or ignite. 
Potholders, towels or wooden spoons could catch fire if 
placed too close to the surface elements.

Do not allow aluminum foil, empty glass/porcelain 
cookware or any material that can melt to make contact 
with the ceramic cooktop. If these items melt on the 
cooktop they may damage the ceramic cooktop.

The surface "Element On" indicator lights will glow when 
one or more elements are turned on. A quick glance at 
these indicator lights when cooking is finished is an easy 
check to be sure all surface elements are turned off.