GE PB970 Benutzerhandbuch

An Anti-Tip bracket is supplied with
instructions for installation in a variety of
locations. The instructions include all
necessary information to complete the
installation. Read the Safety Instructions
and the instructions that fit your situation
before beginning installation.

• Range must be secured by Anti-Tip bracket

supplied.

• See instructions to install (supplied with bracket).

• Unless properly installed, the range could

be tipped by stepping or sitting on the door.
Injury may result from spilled hot liquids 
or from the range itself.

Typical installation of anti-tip bracket attachment to wall

Bracket

Screw must

enter wood

or metal

Wall plate

Replace the terminal block cover on the
range back by replacing the screw removed
earlier. Make sure that no wires are pinched
between the cover and the range back.

Terminal
block cover

Screw to
replace
terminal
block cover

Back of range

Measure the height of your countertop 
at the rear of the opening (X).

Adjust two rear leveling legs so that the
rear of the cooktop (Y) is at the same
height as the counter (X).
Slide unit into place.

X

Y