Bertazzoni X365PIRX Benutzerhandbuch

Seite von 50
 
34
 
CARE AND MAINTENANCE 
SELF‐CLEANING THE OVEN  
Electric Oven 
The self‐cleaning mode of your new range 
features a pyrolytic self‐cleaning cycle. When set 
to the CLEAN mode, the oven reaches a high 
temperature of approximately 840°F/450°C that 
burns off all food residues from the inside of the 
oven. 
 
When the oven is set for CLEAN, the cooktop 
burners may be used. 
 
It is common to see smoke and/or flames during 
the clean cycle, depending on the content and 
amount of greasy residues in the oven. If the 
flame persists, turn off the oven and allow it to 
cool before opening the door and wipe off the 
excessive residues. 
 
At the end of the CLEAN cycle, some grey ash or 
burned residue may remain inside the oven. This 
is a mineral deposit that does not burn or melt. 
The amount of ash depends on how heavily 
soiled the oven was before it was cleaned. It is 
easily removed, when the oven is cold, using a 
damp paper towel, sponge, or cloth. 
 
Wipe off any smoke residue that remains on the 
front frame with a cleaning product suitable for 
oven cavity cleaning. If stains remain, use a mild 
liquid cleaner. The amount of smoke stain is 
directly related to the amount of food residues in 
the oven cavity before the start of the self‐clean‐
ing cycle.  
 
Before Self Cleaning the Oven 
 
Wipe out large spillages, grease and any loose 
soil that can be easily removed. Remove any soil 
that is outside the door seal area. This appliance 
is designed to clean the oven interior and the 
portion of the door that faces the oven cavity. 
The outer edges of the door and the oven cavity 
are not in the cleaning zone. Wipe this area clean 
before starting the self‐cleaning cycle. 
Remove all utensils and racks. 
Make sure the light bulbs and glass covers are in 
place. 
Turn on the ventilator hood above the range and 
leave it on until the self‐clean cycle is completed 
(red indicator light turning off). 
NOTE: FOR THE FIRST SELF‐CLEANING CYCLE, 
REMOVE SMALL ANIMALS AND BIRDS FROM THE 
KITCHEN AND SURROUNDING AREAS. OPEN A 
NEARBY WINDOW FOR ADDITIONAL 
VENTILATION. 
 
Door Lock 
When the CLEAN cycle starts, the automatic door 
lock cycle begins. Check the door to confirm that 
it is locked. You can stop the self‐cleaning cycle 
by turning the function selector to the OFF posi‐
tion. The CLEANING light will turn off only after 
the oven has cooled below 500°260°C and the 
automatic door lock has completed its cycle to 
the open position. 
NOTE: MAKE SURE THAT THE OVEN DOOR IS 
LOCKED AT THE BEGINNING OF THE SELF‐
CLEANING CYCLE. 
 
To Set/Start Self‐Clean cycle 
1. Check that the oven cavity is completely empty 
and the oven door correctly closed. 
2. Select CLEAN fu on oven function selector. 
3. Set temperature selector to CLEAN. 
After these 3 steps the cooling fans will activate, 
the oven door will lock automatically after 60 
seconds and both the pre‐heating and clean light 
indicators will turn on. 
As  soon  as  clean  light  turns  on  check  to  ensure 
that the oven door is correctly locked. 
 
At the End of the Self‐Clean cycle 
The self‐cleaning cycle lasts approximately 2‐2 ¼ 
hours; 30‐40 minutes for pre‐heating the oven 
(pre‐heating and clean light both on), 60 minutes 
for actual cleaning (heating and clean light both 
on), 30‐35 minutes for cool‐down (only clean 
light on). 
When the CLEAN light is turned off the oven door 
is unlocked. This will happen when the oven 
temperature drops below 460‐500°F/240‐260°C 
about. 
At the end of the cycle turn both the oven mode 
selectors and the temperature to the OFF 
position. 
 
Cleaning Hints 
1 . The porcelain enamel finish is acid resistant, 
but not acid proof. Acidic food, such as citrus 
juices, tomatoes, rhubarb, vinegar, alcohol or 
milk, should be wiped off and not allowed to 
bake onto the porcelain during the next use. 
2  .  Remove the oven racks. 
3 . The heating elements in the oven do not 
require cleaning; the elements burn 
themselves clean when the oven is in use.  
Elements are permanently connected. It is 
not necessary to clean the broiler shield 
above the broil element. 
 
CAUTION 
The interior of the oven will still be at baking 
temperatures when the automatic lock cycles to 
its open position and the oven door can be 
opened.