Blomberg TSM1750u Benutzerhandbuch

EN

10

If the lamp does not operate, follow 
the following procedures:
1. Switch off the electric connection of 
the refrigerator and pull out the plug.
 Remove all shelves and drawers for 
easy access.

2. Remove the cover carefully by 
pressing it on the edge with your index 
finger, as seen in figure b. Try not to 
damage the plastic cover and interior 
facing.

3. First, screw the bulb into its 
socket tightly and check whether it is 
loosened. Insert the plug again and 
switch on the electricity. If the bulb 
operates, replace the light cover by 
placing the back lock, pushing it onto 
its place.

4. If the bulb does not operate, 
switch off the electric connection of 
the refrigerator and pull out the plug. 
Replace the bulb with a new 15 watt 
(maximum), screw covered E14 (SES) 
bulb.

5. Immediately chuck out the damaged 
bulb carefully and properly. 
Spare bulb can be obtained from 
authorized services.