Blomberg KGM 9680 PX Benutzerhandbuch

EN

16

Before you start using the fridge/
freezer check that:

 

1. The feet have been adjusted for
perfect levelling.

 

2. The interior is dry and air can

 circulate freely at the rear of the

cabinet.

 

3. Clean the interior as recommended
under “CLEANING AND CARE.”

 

4. Insert the plug into the wall socket
and switch on the electricity supply.

 • When the door is open the fridge

interior light will come on.

 

5. You will hear a noise as the

 compressor starts up. The liquid and
 gases sealed within the refrigeration
 system may also give rise to noise,
 whether the compressor is running or

not which is quite normal.

 “Due to operation of the fan inside
 the frost free freezer compartment,
 overall noise level is slightly higher
 in comparison to non-frost free
 appliances. This is quite normal and is

not a fault.”

 

6. Set the setting knob half way
between min and max.

 

7. Front edges of the cabinet may feel

 warm. This is normal. These areas
 are designed to be warm to avoid

condensation.

 

8. “Do not load the appliance

 immediately it is switched on. Wait
 until the correct storage temperature
 has been reached. We recommend
 that you check the temperature
 with an accurate thermometer (see;

Temperature Control and Adjustment)”

 

9. When the freezer reaches the

 desired temperature the freezer fan will
 stop. When the freezer fan is on, the
 noise will be louder when the freezer

door is opened.

 

10. Avoid spillage of food particularly

 small items like rice, peas, beans
 through the fan guard as they may
 cause the cooling system to block and

therefore operate less efficiently.