Blomberg TSM 1551 P Benutzerhandbuch
EN
12
4
Before operating
Final Check
Before you start using the fridge/
freezer check that:
freezer check that:
1. The feet have been adjusted for
perfect levelling.
2. The interior is dry and air can
circulate freely.
3. Clean the interior as recommended
under “CLEANING AND CARE.”
4. Insert the plug into the wall socket
and switch on the electricity supply.
When the door is open the interior light
will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6. Slight undulation of the top of the
cabinet is quite normal due to the
manufacturing process used, so do
not worry, it is not a defect.
perfect levelling.
2. The interior is dry and air can
circulate freely.
3. Clean the interior as recommended
under “CLEANING AND CARE.”
4. Insert the plug into the wall socket
and switch on the electricity supply.
When the door is open the interior light
will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6. Slight undulation of the top of the
cabinet is quite normal due to the
manufacturing process used, so do
not worry, it is not a defect.
7. We recommend that you set the
thermostat knob at 3 (three) and monitor
the temperature to ensure the appliance
maintains desired storage temperatures
(See section Temperature Control and
Adjustment).
8. Do not load the appliance immediately
it is switched on. Wait until the correct
storage temperature has been reached.
We recommend that you check
the temperature with an accurate
thermometer (see; Temperature Control and
Adjustment).
Important Note :Ice formation at the
back is normal, do not worry. (See
Defrosting)
thermostat knob at 3 (three) and monitor
the temperature to ensure the appliance
maintains desired storage temperatures
(See section Temperature Control and
Adjustment).
8. Do not load the appliance immediately
it is switched on. Wait until the correct
storage temperature has been reached.
We recommend that you check
the temperature with an accurate
thermometer (see; Temperature Control and
Adjustment).
Important Note :Ice formation at the
back is normal, do not worry. (See
Defrosting)