Blomberg KGM 9550PX Benutzerhandbuch
EN
10
REVERSING THE DOORS
We recommend that you reverse doors
before switching on for the first time.
before switching on for the first time.
Tools required: Small and medium size
flat and cross-headed screwdrivers, a
pair of pliers.
flat and cross-headed screwdrivers, a
pair of pliers.
Spare Parts supplied in the plastic
bag: The following parts, which are
exclusively for left hand side fitted
hinge operation are supplied in a
plastic bag with the appliance:
bag: The following parts, which are
exclusively for left hand side fitted
hinge operation are supplied in a
plastic bag with the appliance:
- Upper door top trim hinge covers –
there are 2 different parts, one for each
side of top trim.
- Upper door middle hinge bushing/
door stopper assembly.
there are 2 different parts, one for each
side of top trim.
- Upper door middle hinge bushing/
door stopper assembly.
We suggest you keep all the parts
supplied in the plastic bag and also
parts, which have been removed when
reversing doors, in a safe place for
possible future, re-use.
supplied in the plastic bag and also
parts, which have been removed when
reversing doors, in a safe place for
possible future, re-use.
IMPORTANT: We suggest you ask
somebody to help you when moving
the appliance around and to hold
doors when removing / re-fitting
hinges and doors to avoid any injury
and damage to the product.
somebody to help you when moving
the appliance around and to hold
doors when removing / re-fitting
hinges and doors to avoid any injury
and damage to the product.
Please refer to diagrams supplied. To
follow numbers in brackets below,
refer to the main diagram.
follow numbers in brackets below,
refer to the main diagram.
1. Switch off the appliance at the
socket outlet and pull out the mains
plug.
2. Remove all loose items and fittings
and food, if any, from inside the
appliance and door racks.
3. Gently prise off plastic hinge covers
on both sides of upper door top trim
and front top panel using a small flat-
headed screwdriver.
socket outlet and pull out the mains
plug.
2. Remove all loose items and fittings
and food, if any, from inside the
appliance and door racks.
3. Gently prise off plastic hinge covers
on both sides of upper door top trim
and front top panel using a small flat-
headed screwdriver.
(1)
4. Gently tilt the appliance back
against a strong wall on its rear side
sufficiently to allow the lower hinge
to be removed. Take care to protect
the appliance, your wall and floor
coverings. You can utilise the original
packaging to do this. Once you tilt the
appliance back, check to make sure
the appliance is completely stable and
safe before you carry on.
against a strong wall on its rear side
sufficiently to allow the lower hinge
to be removed. Take care to protect
the appliance, your wall and floor
coverings. You can utilise the original
packaging to do this. Once you tilt the
appliance back, check to make sure
the appliance is completely stable and
safe before you carry on.
(2)
5. Unscrew and remove the lower
hinge using a cross-headed
screwdriver while holding the lower
door firmly.
hinge using a cross-headed
screwdriver while holding the lower
door firmly.
(3)
6. Remove lower door carefully off the
middle hinge and stand door upright in
a safe place.
middle hinge and stand door upright in
a safe place.
(4)
7. Open upper door and unscrew and
remove the middle hinge while holding
the upper door firmly. Use a flat-
headed screwdriver. Middle hinge will
need to be rotated 180 degrees before
re-fitting on the opposite side.
remove the middle hinge while holding
the upper door firmly. Use a flat-
headed screwdriver. Middle hinge will
need to be rotated 180 degrees before
re-fitting on the opposite side.
(5)
8.Remove upper door carefully off the
upper hinge and stand door upright in
a safe place.
upper hinge and stand door upright in
a safe place.
(6)
9. Unscrew and remove the upper
hinge using a flat-headed screwdriver.
(7)
hinge using a flat-headed screwdriver.
(7)