Blomberg KGM 9550PX Benutzerhandbuch

EN

7

1. The appliance should be 
transported only in a vertical upright 
position. The packing as supplied 
must be intact during transportation.
2. If during the course of transport 
the appliance has to be transported 
horizontally, it must only be laid on its 
right hand side when standing in the 
frontof the appliance. After bringing 
it to upright position,it must not be 
operated for at least 4 hours to allow 
the system to settle.
3. Failure to comply with the 
above instructions could result in 
damage occuring to the appliance. 
The manufacturer will not be held 
responsible if these instructions are 
disregarded.
4. The appliance must be protected 
against rain, moisture and other 
atmospheric influences.
5. When positioning your appliance 
take care not to damage your flooring, 
pipes, wall coverings etc. Do not move 
the appliance by pulling by the door or 
handle.
6. Empty any water in the drain 
tray before moving. See section 
‘Defrosting’ and ‘Care & cleaning’ for 
further information.
7. Make sure that the defrost water 
pipe at the back of the product is fixed 
to the plastic evaporating pan on the 
top of the compressor, to avoid defrost 
water spillage on the floor.

IMPORTANT : Care must be taken 
while cleaning / carrying the appliance 
to avoid touching the bottom of the 
condenser metal wires at the back of 
the appliance as you might injure your 
fingers and hands.
Do not attempt to sit or stand on top 
of your appliance as it is not designed 
for such use. You could injure yourself 
or damage the appliance.
“IMPORTANT: Make sure that 
mains cable is not caught under the 
appliance during and after carrying 
/ moving the appliance, to avoid 
the mains cable becoming cut or 
damaged.”Do not allow children to 
play with the appliance or tamper with 
the controls.
BLOMBERG declines to accept any 
liability should the instructions not be 
followed.