Blomberg BRFB1800SSIM Benutzerhandbuch

EN

11

Depending on the model of the 
refrigerator, you can connect it either to 
a demijohn or water mains.
 First you must connect the water hose 
to the refrigerator.
In cases where a demijohn is used, a 
separate pump must also be used.

WARNING: Refrigerator and the 

pump, if any, must be unplugged 
during connection.
Following parts may not be supplied 
with your product since they are not 
required when using a demijohn.
Check that following parts have been 
delivered together with the product:

1.Union for connecting the water hose 
to the rear of the refrigerator
2.3 pieces of pipe clips (used to secure 
the water hose)
3.5-meter long water hose (1/4 inch in 
diameter)
4.Cold mains water valve with mesh 
filter (tap adapter)
5.External water filter. (If there is 
a demijohn connection; it is not 
necessary to use a water filter.)

1.Slip the union (b) onto the water 
hose (a).
2.Push the water hose downwards 
firmly to slip it onto the water inlet valve 
(c).
3.Tighten the union (c) by hand to 
secure it onto the water inlet valve.
Normally, you are not required to 
tighten the union with a tool. However, 
you can use a spanner or pliers to 
tighten the union if there is a leakage.