Frigidaire FPHB2899LFB Benutzerhandbuch

9

To remove the refrigerator doors:
  1  Trace lightly around the door’s top hinges with a 

pencil. This makes reinstallation easier.

  2  Disconnect the harness by grasping both sides of the 

connector firmly, depress the latch, and pull apart.

Remove the two (2) screws from the top hinge. Lift 

the door off of the bottom hinge and set it aside. 

  3  Detach the water tube from the connector  

located behind the refrigerator and pull the tube 

back out to the front of the unit. The connector 

releases when you press inward on the outer 

sleeve while pushing the tube toward the connector 

then while continuing to hold in the sleeve, pull the 

tube away.

If your refrigerator will not fit through an entrance area,

you can remove the doors. Check first by measuring the

entrance. 
To prepare for removing the doors:
  1  Make sure the electrical power cord is unplugged 

from the wall outlet.

  2  Open the freezer drawer and remove the toe grille 

(see “Installation” section).

  3  Remove any food from the door shelves and close 

the doors.

To remove the top hinge covers:
  1  Remove the two (2) screws from each cover over 

the top door hinges.

  2  Lift inside edge of hinge cover and tilt back.



DO NOT remove the ground screw from hinge.



Use care while pulling the water tube from the unit to 

be sure that you do not kink the tube.