Samsung RF26VAB Benutzerhandbuch

Setting up your French Door Refrigerator

getting ReADy to instALL tHe ReFRigeRAtoR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art 

features and efficiencies that this new appliance offers.

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) flooring.

•  A location with enough space for the Refrigerator doors to 

open easily.

•  Allow sufficient space for air circulation of the internal 

cooling system. 

   If the Refrigerator does not have enough space, the internal cooling 

system may not work properly. 

 

Setting Up

First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways 
(both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung French Door Refrigerator.

•  Allow clearance to the right, left, back and top when installing. This will help reduce power 

consumption and keep your energy bills lower.

•  

When installing, servicing, or cleaning behind the refrigerator, be 
sure to pull the unit straight out and push back in straight after 
finishing.
Also, make sure your floor supports the full-load regrigerator.
Otherwise, it may cause floor damage.

Depth

MoDeL

Capacity(Cu.Ft)

Dimensions 

(inch)

Width

Case Height

with Hinge 

without Hinge

with Handle

without Door

RF26VAB

26

35 ¾

70

68 

⅝

35 

⅝

29 

⅛

setting uP tHe ReFRigeRAtoR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of 
the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.  Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the 

Refrigerator. Refer to installation instructions in this manual.

2.  Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3.  Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled 

and the motor will run smoothly.

4.  After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store 

food and drinks in the Refrigerator after the temperature is sufficiently cool.