Frigidaire 316902315 Benutzerhandbuch

16

The oven control is factory preset to display the oven

temperature with Fahrenheit (°F) values. The control may

be changed to display either Fahrenheit or Celsius
temperatures.
To change the temperature to display Celsius (°C) or

1. Press 

keypad. "— —" appears in the display.

2. Press and hold the

keypad until "HI" appears in the

display.

3. Press and hold  

  keypad until °F or °C appears in

the display.

4. Press the

 keypad to change °F to °C or °C

to °F.

5. Press any keypad to return to normal operating mode.

1. Press and hold  

keypad for 5 seconds until a

tone sounds. " — —  hr" will appear in display for

continuous cooking. The current time of day will return

to the display.

2. To cancel the continuous bake setting, press and hold

 keypard for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control

has returned to the 12-Hour Energy Saving feature.

The temperature display mode cannot be changed when

the oven or self-clean is active.

Changing between continuous bake or 12-Hour Energy

savings mode does not change how the cooktop operates.

To adjust the clock when the display is not flashing:
1. Press 

 keypad twice (do not hold keypad down).

"CLO" will appear in the display.

2. Within 5 seconds, adjust the time by pressing the

or

and release the keypad when the correct time

displays. Any adjustments made will accept in 5 seconds.

When the appliance is first powered up or when the power

supply to the appliance has been interrupted and restored,

the display will flash the time of day. Be sure to set the

clock with the correct time of day before using the oven.

The clock cannot be set or adjusted when the oven is

active including self-clean.

Press and hold the 

 keypad until the control beeps

once (about 7 seconds). This will block the controls from

sounding when a keypad is pressed in the future.

Normally a beep will sound each time a keypad is pressed.

If desired, the oven control may be set for silent keypad

operation.

When the control is set for silent keypad operation the

timer, preheat and any end of cycle or any error tone

alerts will remain audible.

To set for audible operation:
Press and hold the  

 keypad until the control beeps

once (about 7 seconds).

The oven control has a built-in 12-Hour Energy Saving

feature that will shut off the oven if the control is left on for

more than 11 hours and 59 minutes. The oven may be

programmed to override this feature for continuous baking.

To set the clock when the display is flashing:
1. Press 

 once. "CLO" will appear in the display.

2. Within 5 seconds, adjust the time by pressing the

or

and release the keypad when the correct time

displays. The new setting will accept in 5 seconds.