Fisher & Paykel HS60CSRX3 Benutzerhandbuch

Seite von 12
3
Installation instructions
Warning!
Failure to install the screws or fixing device in accordance 
with these instructions may result in electrical hazards.
Height of rangehood
Please read the entire instructions BEFORE installing the 
rangehood.
Ascertain the desired installation height of the rangehood.
When installing the rangehood, the lower edge of the 
unit must be a minimum of 600 mm (650 mm for gas 
cooker) above the cooking surface.
The recommended position for the hood is 650 mm 
above the cooktop.
 Any installation above 750 mm will compromise the 
extraction performance.
A = 600 min (electric cook top)
A = 650 min (gas cook top)
Ducting options
Some authorities require rangehoods to be vented outside. Attention should be given to ensure 
that any applicable regulations concerning the discharge of exhaust air is fulfilled.
 
* In recirculating mode you must use charcoal filters to eliminate cooking smells. (Part No.792390)
† HS60CSRX3 models are supplied with charcoal filters and 70 mm handle.
Ducting 
through roof
Ducting through 
cavity to side
Front Ducting/ 
Recirculating *†
Fig.3 Ducting options
  
 
120 mm (top extraction) or 100 mm (rear extraction) diameter round ducting can be used in 
conjunction with this model.
For optimal efficiency, use smooth-walled ducting for reduced noise and increased airflow. 
Flexible ducting should only be used as a last resort.
Note: we recommend an Easy Fit by Fisher & Paykel or a UNIDUCT ducting system, products that 
have been designed to expel air efficiently.
Fig.2 Positioning
Not les  650 mm
Gas Burner