NuTone ZN110HL Merkblatt

Seite von 2
REFERENCE 
QTY. 
REMARKS 
Project
  
 
 
Location
  
 
 
Architect
  
 
 
Engineer
  
 
 
Contractor
  
 
 
Submitted by   Date
SPECIFICATION SHEET
Broan-NuTone LLC    Hartford, Wisconsin    www.nutone.com    888-336-3948
 
21J 
99044925B
MODEL ZN110HL 
VENTILATION FAN 
WITH LIGHT
FEATURES
UltraGreen™ Energy Saving DC Motor
•  DC motor for efficiency well beyond ENERGY STAR
®
 requirements.
•  Multi-speed capability ideal for meeting ASHRAE 62.2, LEED and
ENERGY STAR
®
for Homes requirements. Can be used to comply with
CA Title 24, as well as local/spot ventilation needs.
UltraSilent™ Sound Technology
•  HVI certified, best-achievable <0.3 Sone level provides nearly silent
operation for a relaxing environment.
•  State-of-the-art blower and duct outlet design smooths airflow.
•  High tech DC motor designed for nearly silent operation.
UltraSmart™ Control Technology
•  Powerful operation maintained over a wide range of real-world
installations (CFM ratings maintained through at least 0.25” static
pressure).
•  Infinitely adjustable low cfm setting allows precise adjustment to prevent
over-ventilating and maximize efficiency.
•  Adjustable time delay sets how long fan will run on high speed before
returning to a continuous lower speed.
UltraLucent™ Lighting Technology
•  Two, ENERGY STAR
®
qualified 18 watt (max) GU24, 3500K bulbs
brightly illuminate room for most any task (bulbs included).
•  One, 4 watt (max) C7 type night-light provides night-time convenience
(bulb not included).
•  Well-diffused, wide light dispersal floods room for maximum effectiveness
and keeps bulbs from showing through lens.
•  Enclosed reflector for minimal light visiblity through the grille.
UltraQuick™ Installation Technology
•  Unique telescoping mounting frame fits through retrofit drywall opening to
allow easy installation from the room side. No attic access needed!
•  Captive screws allow for easy new construction installation.
•  Mounting frame positioning tabs provide easy vertical positioning for new
construction.
•  Easy to insert and remove snap-in housing. No screws required!
•  Easy to insert and remove snap-in blower.
•  Inside or outside duct connector and knockout plate mounting provides
flexibility for new construction or retrofit.
UltraSense™ Humidity Sensing Technology
•  Detects humidity at the ceiling where it is greatest, which minimizes
reaction time.
•  Automatically switches fan to maximum airflow (CFM) when either
of these conditions is detected:
 - Rapid to moderate humidity increase;
 - Humidity above set point (50%-80% RH).
•  Humidity level is set with easily accessible user adjustment.
•  Can be used to comply with CALGreen standards.
•  Two wire manual operation for odor control - Boosts fan to
maximum airflow (CFM) when power line through wall switch is
cycled ON, OFF and back ON.
•  After humidity has stabilized and is below set point or after boosted
through power line cycling, fan operates at maximum airflow (CFM)
until UltraSmart™ user adjustable (5 to 60 minutes) time delay set
point is reached then fan reduces to continuous airflow (CFM) level.
U.L. Listed for use over bathtubs and showers when connected to a
GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (Type IC).
3-year warranty on product, 1-year warranty on bulbs.
DIMENSIONS (Inches)
SPANS 14 TO
24 ON-CENTER
FRAMING