U-Line B198 Benutzerhandbuch

Seite von 20
U-Line Product Operation
5
OFF
ON
1 Product Operation
To turn the unit on or off: 
Press the rocker switch located below the temperature control 
dial in the center of the grille(2), inside the door on the front 
panel, or behind the grille. 
IMPORTANT
IMPORTANT
On ice maker equipped units, it is possible that dirt or 
scale will dislodge in the water line. Always throw away all 
ice cubes made during the first two to three hours of 
operation.
Air Flow
IMPORTANT
IMPORTANT
The unit requires proper air flow to perform at its highest 
efficiency. Do not block the front grille or internal fans at 
any time, or the unit will not perform as expected. Do not 
install the unit behind a door.
Initial Startup
All U-Line controls are preset at the factory. Initial startup requires 
no adjustments. 
IMPORTANT
IMPORTANT
U-Line recommends allowing the unit to run overnight 
before loading refrigerator or freezer with product.
Control Dial
Combo Models provide two temperature zones within the cabinet 
to satisfy the specific storage requirements.
The control dial sets a single continuous temperature. This set-
point temperature is a base setting used by the controller to 
maintain the temperature zone in the unit. The factory default MID 
setting, number 3 or 4 set-point for Beverage Center and 
Refrigerator models is 38°F. The factory default set-point Wine