GE 164 D2092P021 Benutzerhandbuch

To replace combination 
light/night light, first disconnect

 at main fuse or circuit

To replace your oven light, first
disconnect power at 

Remove the top 

 by taking off

Remove screw on right side of light

3 screws which hold it in place.

compartment cover and lower cover
until it stops.

Be sure bulbs to be replaced are
cool before removing. Break the
adhesive seal by gently unscrewing

the bulbs. Replace with 40-watt
incandescent bulbs (Part No.

 available from 

Next, remove the single screw
located above door near center of

oven that secures light housing.
Remove bulb and replace with
a 30-watt GE bulb (Part No.

 available from your

GE supplier. Secure light housing

GE supplier. ‘High intensity 40-watt

with screw.

bulbs 

 No. 

 which

are available in supermarkets and
hardware stores may also be used
for replacements. Raise light
compartment cover and replace
screw. Connect electrical power to
microwave oven.

This appliance must be grounded.
In the event of an electrical short
circuit, grounding reduces the risk
of electric shock by providing an
escape wire for the electric current.
This appliance is equipped with a
power cord having a grounding
wire with a grounding plug. The

plug must be plugged into an outlet
that is properly installed and
grounded. (Fig. 1)

use of the grounding plug 
in a risk of electric shock.

Consult a qualified electrician or
service technician if the grounding
instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly
grounded.

Where a standard two-prong wall

receptacle is encountered, it is

your personal responsibility and
obligation to have it replaced with
a properly grounded three-prong
wall receptacle.

Do not 

30