Blodgett B-14G Merkblatt

44 Lakeside Avenue, Burlington, VT 05401 • Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

Printed in U.S.A.

NOTE: FOR COMMERCIAL USE ONLY

P/N R10642 Rev D (9/05)

SHORT FORM SPECIFICATIONS: Provide Blodgett Combi model B-14G single or double, gas combination-oven/steamer.  Unit shall have the ability to cook with pressureless steam,
hot air, or combination of steam and hot air. Mechanical mode switch shall allow the operator to choose four modes, steam, hot air, combi or cool down mode. Timer to be 120 minute
motor driven. Temperature control to be solid state with rotary knob. Unit shall include two speed fan, steam on demand feature and Vario Steam® feature. The interior shall have the
capability of being hosed down for cleaning. Door gaskets shall be easily removable for replacement and cleaning. Unit shall be open vented for waist air quenching.  A start-up inspec-
tion service will be performed by our factory authorized agent at no cost to the operator.

GAS SUPPLY (per section):

3/4" NPT
Inlet Pressure:
Natural

7.0" W.C. static to unit

Propane

14.0" W.C. static to unit

Maximum Input:
Single

65,000 BTU/hr

Double

130,000 BTU/hr

WATER SUPPLY (per section):

Water Quality Requirements 
TDS: < 100 ppm

Hardness: 80-120 ppm

pH: 7.0 - 8.0

Chlorides: < 30 ppm Max. Water Temp: 100°F (38°C)
30(min)-50(max) PSI 2" drain connection

3/4" hose cold water

Distance from filter to oven: 7’ maximum
Filter weight (when full): 12 lbs
8’ hoses to connect oven to filter are supplied

Approx. Weight:
Single section

680 lbs. (309 kg)

Double section

1370 lbs. (619 kg)

Stand w/guides

141 lbs. (64 kg)

Crate sizes (per section):
53" H x 45" W x 42" D (1346.2 x 1143 x 1066.8mm)

34-5/8" D x 40-1/8" (879.4 x 1019mm)

33" (838mm) per section

Additional Height:
4" adjustable legs

4-7/8" - 6" (123.8-152.4mm)

6" adjustable legs

6-7/8" - 8" (174.6-203.2mm)

6" adjustable seismic legs

6-5/8" - 8" (168.3-203.2mm)

25" adjustable legs

25-1/4" - 26-3/8" (641.4-670mm)

Low profile caster

4" (101.6mm)

Stand w/rack supports

22-1/2" - 23-5/8" (571.5-600.1mm)

Stand w/rack supports on casters 22-5/8" (574.7mm)

Right Side

1" (26mm)

Rear

6" (152.4mm)

Left Side (with casters)

0" (0mm)

Left Side (without casters)

12" (304.9mm)

Uncrated

36-1/4" (921mm)

Crated

42" (1066.8mm)

POWER SUPPLY (per section):

115VAC, 10 amp, 1 phase, 60 Hz., 2-wire with ground,
6' (1.8m) electric cord set furnished.
Each unit requires a dedicated 15 amp. circuit.