Fisher & Paykel BI602XC Benutzerhandbuch

  Please make this information available to 

the person responsible for installing the 
product as it could reduce your installation 
costs.

  The cavity must be a completely sealed 

box with no gaps. This will ensure the 
cooling air flows under the product and 
through the oven frame to give the correct 
venting and cooling for the oven and 
cabinet surround.  Failure to seal cavity 
box may cause distortion of surrounding 
cabinetry.

  Read these instructions carefully before 

installing or using this product.

  Ensure a suitable disconnection switch 

is incorporated in the permanent wiring, 
mounted and positioned to comply with 
the local wiring rules and regulations.  A 
means of disconnection with at least a 
3mm air gap contact separation in all poles 
must be incorporated into the fixed wiring 
in accordance with the wiring rules, unless 
the local wiring rules allow for the following 
variation.  A means of disconnection from 
the supply having an air gap separation 
in all active (phase) conductors must be 
incorporated in to the fixed wiring.

  Ensure that the location of the oven 

connection socket is outside the installation 
space if the product is flush to the rear wall.

  Ensure the benchtop and the oven cavity are 

square and level.

  Ensure the electrician provides sufficient 

free length of mains cable to reach from the 
bottom rear of the cavity to at least 1.5 metres 
in front of the bottom edge of the opening.  
The cable may enter the cavity from the side, 
top or bottom, but top entry must be at the 
rear of the cavity.

  Use easy to clean finishes for the wall surfaces 

surrounding the oven and cooktop to aid 
in removal of any cooking fume staining 
resulting from the use of the oven and 
cooktop.

  Check the height from the floor suits the user.

  Ensure that drawers and doors will be clear of 

obstruction when fully opened.