Frigidaire FFEW2725LB Benutzerhandbuch

9

The electronic oven control is set to operate in °F 

(Fahrenheit) when shipped from the factory. The oven 

can be programmed for any temperature from 170°F to 

550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from 

1.  Press and hold Broil pad for 7 seconds until °F or °C 

appears in the display.

2.  Press the Up or Down arrow pad to change °F to 

°C or °C to °F.

3.  Wait 5 seconds to accept the changes or press Clear 

off pad to accept the changes.

1.  Press and hold the Clock pad for 7 seconds. After 7 

seconds, “12Hr” or “24Hr” will appear in the display 

and the control will beep once.

2.  Press the Up or Down arrow pad to switch between 

the 12 and 24 hour time of day display. The display 

will show either “12Hr” or “24Hr”.

3.  Wait 5 seconds or press the Clear off pad to return 

to the time of day display.

4.  Reset the correct time as described in To set the 

Clock above. Please note that if the 24 hour time 

of day mode was chosen, the clock will now display 

time from 0:00 through 23:59 hours.



If “SP” appears, the control will operate with normal 

sounds and beeps. If “- -” appears, the control is in the 

silent operation mode.





The clock cannot be changed while the oven is in used.



•  The indicator light located above the Timer On•Off 

pad will glow while the minute timer is active.

•  The minute timer does not start or stop cooking. It 

serves as an extra timer in the kitchen that will beep 

when the set time has run out. The minute timer 

can be used alone or during any of the other oven 

functions. When the minute timer is in use with any 

other mode, the minute timer will be shown in the 

display. To view other functions, press the function 

pad for that mode.

When choosing a function, a beep will be heard each 

time a pad is pushed. If desired, the controls can be 

programmed for silent operation.

To tell if your oven is set for normal or silent operation 

push and hold Start time pad for 7 seconds. “- -” or 

“SP” appears in the display. Within 5 seconds, press 

the Up or Down arrow pad to switch between normal 

sound operation and silent operation mode. The display 

will show either “- -” or “SP”. Wait 5 seconds to return to 

normal operating mode.

1.  Press the Timer On•Off pad.

2.  Press the Up arrow pad to increase or Down arrow

pad to decrease the time in one minute increments. 

The timer can be set for any amount of time from 1 

minute to 11 hours and 59 minutes.

3.  The display shows the timer count down in minutes 

if more than 1 hour remains. When less than 1 hour 

remains, the display will count down in seconds.

4.  When the set time has run out, the timer will beep 

3 times. It will continue to beep 3 times every 8 

seconds until the Timer On•Off pad is pressed.

When the range is fi rst plugged in, or when the power 

supply to the appliance has been interrupted, the display 

will fl ash “12:00”.

1.  Press the Clock pad once (do not hold pad down).

2.  Within 5 seconds, push and hold the Up or Down 

arrow pad until the correct time of day appears in 

the display.

3.  Press the Clock pad to accept the new time of day. 

If the Clock pad is not pressed, the timer will return 

automatically to the new time of day after 7 seconds.

run out: Press the Timer On•Off pad.