Fisher & Paykel BI602CTE Benutzerhandbuch
2
Installation Instructions
Flush fitting installation options
c
b
a
20 mm
2.5 mm
20 mm
2.5 mm
20 mm
2.5 mm
CUPBOARD FRONT
DRAWER FRONT
Installation instructions
1
Check that the oven cavity is square
and within the limits in the installation
dimensions.
dimensions.
2
Remove the mains wiring access cover.
3
Connect the mains wiring and replace the
access cover.
4
Remove the oven door and accessories, lift
and slide oven into place. When installing
the oven it is essential to centre the product
in the cavity giving a spacing of 2.5mm from
the door edge to the joinery
the oven it is essential to centre the product
in the cavity giving a spacing of 2.5mm from
the door edge to the joinery
5
Secure oven in cavity using the four ‘wood
screws’ and washers supplied through the
enamelled frame at either side of the oven as
shown in the flush fitting installation options.
enamelled frame at either side of the oven as
shown in the flush fitting installation options.
6
Test then refit the door and accessories,
check that the oven is firmly secured in the
kitchen unit.
kitchen unit.
Installing a cooktop above an oven
If installing a cooktop above the oven ensure
adequate clearance is provided for the
cooktop as per the Cooktop Manufacturers
Instructions.
adequate clearance is provided for the
cooktop as per the Cooktop Manufacturers
Instructions.