Frigidaire 318205312 Betriebsanweisung

Seite von 32
25
note
If a 2 or 4 hour clean time is desired, press selF clean 
multiple times to toggle between 2, 3 or 4 hours.
note
If a 2 or 4 hour clean time is desired, press selF clean 
multiple times to toggle between 2, 3 or 4 hours.
note
Allow about 15 seconds for the oven door lock to close.
SETTING SELF-CLEAN CYCLE TIME LENGTH
The selF clean pad controls the Self-Cleaning feature. If 
you are planning to use the oven directly after a self-clean 
cycle remember to allow time for the oven to cool down 
and the oven door to unlock. This normally takes about one 
hour.  So a 3 hour self-clean cycle will actually take about 
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light 
soils, a 3 hour cycle for average soils, and a 4 hour cycle 
for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour Self-Cleaning cycle 
to start immediately and shut off automatically
1.  Be sure the clock is set with the correct time of day and 
the oven door is closed.
2.  Press selF clean“cln” and “3:00” HR will show 
in the display. The control will automatically clean for 
a 3 hour period (default self-cleaning cycle time).
SELF-CLEANING
3.  Press start. “door loc” will appear, a beep will sound 
and the “door” and   icon will flash; the letters “cln” 
will remain on in the display.
4.  As soon as the control is set, the motor driven oven 
door lock will begin to close automatically. Once the 
door has been locked the “door” indicator light and 
 icon will stop flashing and remain on. Also, the oven 
icon will appear in the display.
When the Self-Clean Cycle is Completed
1.  “Hot” will appear in the display. The time of day, the 
door” and   icon will remain in the display.
2.  Once the oven has cooled down for approximately 1 
HOUR, “door oPn” will appear and the “door” and 
 icon will flash until the door is unlocked, the oven 
door can then be opened and the timer will revert back 
to the time of the day.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning 
cycle due to excessive smoke or fire in the oven:
1.  Press cancel.
2.  The oven door can only be opened after the oven has 
cooled down for approximately 1 HOUR, “door oPn” 
will appear and the “door” and   icon will flash until 
the door is unlocked, the oven door can then be opened 
and the timer will revert back to the time of the day.
The selF clean and delaY start pads controls the 
Delayed Self-Clean operation. The automatic timer will turn 
the oven on and off at the time you select in advance.
To  set  the  control  for  the  Self-Cleaning  Cycle  to 
start at a delayed time and shut off automatically 
(example: 3 hour self-clean cycle to start at 4:30)
1.  Be sure the clock is set with the correct time of day and 
the oven door is closed.
2.  Press selF clean“cln” and “3:00” HR will show 
in the display. The control will automatically clean for 
a 3 hour period.
3.  Press start. “door loc” will appear, a beep will sound 
and the “door” and   icon will flash; the letters “cln” 
will remain on in the display.
4.  Press delaY start. Enter the desired start time using 
the number pads 4 3 0.
5.  Press start. “delaY”, “door” and   icon icons 
will remain on.
6.  As soon as the control is set, the motor driven oven door 
lock will begin to close automatically. Once the door has 
been locked the “door” and   icon indicator light will 
quit flashing and remain on. 
7.  The control will start the self-cleaning at the set start 
time, for the period of time previously selected. At that 
time, the icon “delaY” will go out;  “cln” and oven 
icon will appear in the display.
When the Self-Clean Cycle is Completed
1.  “Hot” will appear in the display. The time of day, the 
“door” and   icon will remain in the display.
2.  Once the oven has cooled down for approximately 1 
HOUR, “door oPn” will appear and the “door” and 
 icon will flash until the door is unlocked, the oven 
door can then be opened and the timer will revert back 
to the time of the day.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning 
cycle due to excessive smoke or fire in the oven:
1.  Press cancel.
2.  The oven door can only be opened after the oven has 
cooled down for approximately 1 HOUR, “door oPn” 
will appear and the “door” and   icon will flash until 
the door is unlocked, the oven door can then be opened 
and the timer will revert back to the time of the day.