Frigidaire 318205312 Betriebsanweisung

Seite von 32
28
care & cleaning
TO  REMOVE  THE  “HIDDEN  BAKE”  COVER
 
(some models)
1.  In order to remove the “hidden bake” cover, pull the 
back edge with one hand about ½ inch and lift up the 
“hidden bake” cover with both hands. (See picture)
2.  When  re-installing  the  “hidden  bake”  cover,  be  sure 
to put it all the way to the back of the oven and lay it 
down on the 2 shoulder screws. Then push the front 
edge of the cover in its place below the front bracket.
To have easier access to the “hidden bake” cover, you can 
remove  the  oven  door  by  following  the  instructions  on 
previous page.
imPortant
Always replace the “hidden bake” cover before the next 
use.
caution
Be sure the oven is unplugged and all parts are COOL 
before replacing the oven light bulb. Do not turn 
the oven light on during a self-cleaning cycle. High 
temperature will reduce lamp life.
caution
Be sure oven is cool
cHanging oven ligHt
On some models an interior oven light will turn on 
automatically when the oven is opened. The oven light 
may be turned on when the door is closed by using the 
oven light switch located on the Electronic Oven control. 
The oven light bulb is covered with a glass shield held 
in place by a wire holder. THIS GLASS SHIELD MUST 
ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.
to replace the light Bulb:
1.  Turn the power off at the main source.
2.  Wear a leather-faced glove for protection against 
possible broken glass.
3.  Replace bulb with a 40 Watt appliance bulb only.
4.  For self-cleaning oven, press wire holder to one side 
to release glass shield, change bulb and be sure to 
replace glass shield.