Philips CED780 Benutzerhandbuch

39

English

EN

13 Troubleshooting

Warning

 

•

Never remove the casing of this device.

To keep the warranty valid, never try to repair 

the system yourself. 

If you encounter problems when using this 

device, check the following points before 

requesting service. If the problem remains 

unsolved, go to the Philips web site  

(www.philips.com/welcome). When you contact 

Philips, ensure that the device is nearby and the 

model number and serial number are available.
No power 

 • Car engine has not been started. Start the 

car engine.

 • Connections are incorrect.

 • Fuse has been damaged. Replace fuse.

No sound

 • Volume is too low. Adjust volume.

 • Speaker connections are incorrect.

No response to the remote control

 • Ensure that the path between the remote 

control and the unit is clear from obstacles.

 • From a close distance, point the remote 

control directly at the unit.

 • Switch F/R to correct position (F for front 

control and R for rear control).

 • The function does not work. See the 

instruction manual.

 • Replace the remote control battery.

Disc does not play

 • Disc is upside down. Ensure that the 

printed side is upwards.

 • Disc is dirty. Clean the disc with a clean, 

soft, lint-free cloth. Wipe the disc outwards 

from the center.

 • Disc is defective. Try another disc.

 • incompatible disc is used. Try another disc.

 • Disc rating exceeds the restriction setting. 

Change the rating settings to lower one.

 • Disc region code is not compatible with 

the unit. Use disc with proper region code.

Can’t play DivX file from SD or USB

 • This device doesn’t support DivX playback 

in SD or USB mode.

No image

 • Parking wire connection is incorrect. Check 

the wiring.

No image on rear display

 • Check if you are playing DivX video. If 

yes, it’s normal, for this device does not 

support video out in DivX playing mode.

Image flashes or distorted

 • Video DVD settings do not match with the 

DVD. Adjust video DVD settings.

 • Video connection is improper. Check the 

connections.

Noise in broadcasts.

 • Signals are too weak. Select other stations 

with stronger signals.

 • Check the connection of the car antenna.

 • Change broadcast from stereo to mono.

Preset stations lost.

 • Battery cable is not correctly connected. 

Connect the battery cable to the terminal 

that is always live.

Fuse is broken

 • The fuse type is incorrect. Replace it with 

a 15A fuse.

 • Speaker wire or power wire is grounded. 

Check the connections.

Display show ERR-12

 • USB/SD/MMC data error. Check the USB 

device or SD/MMC card.

About the Bluetooth device

Music playback is unavailable on the system 

even after successful Bluetooth connection.

 • The device cannot be used with the 

system to play music.