U-Line 1000 Benutzerhandbuch

U-Line Wine Guide

Specially designed horizontal wine racks properly positioned the 
bottles so the wine remains in contact with the cork and assure 
the cork does not become dry.

Stock the unit as follows:

1. Stock the wine racks beginning with the lowest rack, at the 

back, and working forward. Stagger the bottles as shown.

2. Repeat Step 1 to stock the next higher rack, and continue until 

all racks are filled.

NOTE: After stocking, allow unit to run 24 hours to 
stabilize product temperatures.

To remove a rack from the cabinet: 

1. Remove any bottles stored on the rack.

2. Grasp the end of the rack, and gently slide it out until it stops.

3. Press the left rack release lever down. At the same time, lift the 

matching right rack release lever up. Pull the rack out until it is 
free of the tracks and the cabinet.

To insert a rack in the cabinet:

Align the left and right rack channels with the tracks in the cabinet. 
Ensure an even track engagement on both sides by gently pushing 
the rack into the cabinet until it stops.

Before reloading the rack, ensure proper movement of the 
travel stops in the left and right track rails by pulling the rack