Gilson 59015C Benutzerhandbuch

5

Each day before operating, lubricate at the following points:

Engine/Motor – Refer to engine/motor operating instructions for all maintenance and
lubrication instructions and requirements.

GREASE FITTINGS :

Refer to Fig. 2

Clean off grease fitting before greasing.  Use pressure type grease gun.  Grease lightly
with general purpose grease (2 to 3 pumps).

§  Drum Shaft Bearings (where used)
§  Drive shaft Bearings
§  Tilt Wheel Shaft Bearings (where used)
§  Brake Lever Shaft (where used)

OIL:
Refer to Fig. 2

Use SAE 30 engine oil.

§  Yoke Tilt Mechanism

For short term storage, clean the mixer and store in a dry place.  If the mixer is not to
be used for an extended period of time, service mixer completely and store it in a dry
place.

1.  Refer to motor/engine instructions for storage instructions.
2.  Cover exposed metal surfaces with a thin coat of SAE 30 engine oil.
3.  Lubricate per instructions under LUBRICATION & STORAGE section.