Sony PCV-R532DS Benutzerhandbuch

The system board contains a CMOS Clear configuration jumper, and two 
sets of reserved jumper blocks (do not change).

The CMOS and Non-Volatile RAM (NVRAM) settings are only cleared if 
the checksum test returns false. Access to specific setup fields is 
controlled by a supervisor password or user password.

The Clear CMOS mode removes the password that is stored in CMOS. No 
other parameters are cleared.  

1

Remove the cover (see 

2

Set the jumpers as directed by a service technician (also see 

on page 70).

3

Reinstall the cover (see 

on page 26).

4

Reinstall the front panel (see 

on page 25).

✍

The configuration jumpers should never need changing unless otherwise directed by a 
technical support or service technician. 

!

OM04588.VSD

CMOS Clear

Clear

2-3

Normal

1-2

= default jumper

1

3

CMOS CLR

2

Reserved (do not change)
Reserved (do not change)