Sony PCV-R532DS Benutzerhandbuch
Removing, Installing, and Replacing Components
45
Installing a 5¼” Internal Hard Disk Drive
Your system comes with an available 5¼” bay to hold an additional 3½”
or 5¼” hard disk drive. The drive you install can access the front panel.
The hard disk drive access light blinks when either internal drive is
active.
or 5¼” hard disk drive. The drive you install can access the front panel.
The hard disk drive access light blinks when either internal drive is
active.
1
Configure the jumpers on the new drive as a secondary slave (see
your drive’s documentation for configuration instructions).
your drive’s documentation for configuration instructions).
2
Disconnect the power cord from the computer.
3
Remove the cover (see
4
Remove the front panel (see
5
Lay the system on its side (see following diagram).
!
Before opening the system unit, save any open files, exit the Windows
®
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
peripherals, and then unplug the power cord.
KY0084.VSD
Drive connector
Power connector
Jumpers