Liebherr EWTN Benutzerhandbuch
A delight in freshness
WFI1051 / EWTN 2956
19
I
NSTALLATION
LBR036
Figure 18
bolt (2). Turn clockwise for down and counter-
clockwise for up.
Maximum adjustment: 19/64" (15 mm).
clockwise for up.
Maximum adjustment: 19/64" (15 mm).
3. Figure 18: Align the appliance at the side with the
cabinet side panel and attach it with screws (1).
- Cover the screws with cover caps (2).
4. Fit the ventilation grille at the bottom [(3) if the
door is hinged on the left, (4) if it is on the right]:
Secure the ventilation grille so that it touches
the floor and then adjust it using the slots.
Secure the ventilation grille so that it touches
the floor and then adjust it using the slots.
1
2
1
2
2
3
3
3
3
10 spanner
8 spanner
2
Figure 17
1. Carefully slide the appliance into the cabinet
until the ventilation grille touches the surround-
ing kitchen cabinet.
ing kitchen cabinet.
2. Align the appliance until it is parallel with the
surrounding kitchen cabinet. Use the open-
end wrench 10 mm (3) to adjust the feet at the
front. Turn clockwise for up and counterclock-
wise for down. For the rear use the adjusting
end wrench 10 mm (3) to adjust the feet at the
front. Turn clockwise for up and counterclock-
wise for down. For the rear use the adjusting
- Figure 17: Connect the appliance to the
main power supply.
- If the appliance is equipped with an
IceMaker, establish the connection for
the water supply. See “IceMaker, Water
Connection”.
the water supply. See “IceMaker, Water
Connection”.