Jenn-Air W10141605 Benutzerhandbuch

1. Touch SELECT to turn on desired cooking surface area.

The heat setting level display flashes “0.”

2. Within 5 seconds, touch the “plus” (+) or “minus” (-) keys to 

increase or decrease power.

3. To select a heat setting from 1 - 9, touch either the “+” or “-” 

keys until the desired level appears in the display. If selection 
is not made within 5 seconds, the surface cooking area will 
shut off.

The heat setting level is indicated by a number or a number 
with a decimal point after it. The decimal point is equal to the 
halfway point between settings. For example, “2.” would 
equal halfway between 2 and 3.

4. The heat setting level number will continue to flash until a 

suitable pan is placed on the surface cooking area. If the 
correct pan is not placed on the cooking area within 
90 seconds, the surface cooking area will automatically turn 
off. See “Cookware” section for suitable cookware.

5. Touch OFF to turn off desired cooking area when finished. 

When “0” appears on the heat setting level display, the 
surface cooking area will turn off within 3 seconds. The hot 
surface indicator “H” appears in the display, if the surface is 
hot. 

Use the following chart as a guide when setting heat levels.

An “H” will appear in the heat setting display as long as any 
surface cooking area is too hot to touch, even after the surface 
cooking area(s) is turned off.

If the cooktop is on when a power failure occurs, the Hot Surface 
Indicator “H” will remain on up to 45 minutes after the power is 
restored to the cooktop. 

The display will cause a tone to sound when a key is touched. 
This setting can be turned off.

NOTE: If the following sequence is not completed within 
90 seconds, the tones will not be deactivated.

1. Set all surface cooking areas to temperature level 3.

2. Use the “-” key to set all surface cooking areas to 

temperature level 0, from right to left.

3. Touch and hold COOKTOP POWER OFF for 5 seconds, and a 

tone will sound to confirm the change.

To turn the display back on, repeat the steps above.

NOTE: The timer, control lock/unlock, and error tones will still 
sound even if the display tone is turned off.

The dual size surface cooking area offers flexibility to cook using 
different sizes of cookware. Single size can be used in the same 
way as a regular surface cooking area. The dual size combines 
inner and outer surface cooking areas and is recommended for 
larger cookware, large quantities of food, and home canning.

The dual size surface cooking area comprises two cooking areas.

If the size of the pan is the same as the single size surface 
cooking area, the cooking area will work as a single size cooking 
area.

If the pan is slightly larger than the single size cooking area, it 
may only activate part of the dual size cooking area. This will 
result in the burner being less efficient and increase the heating 
time.

If the size of the pan is the same as the dual size surface cooking 
area, the dual size cooking area will activate automatically.

The Cooktop Power Off key turns off all surface cooking areas at 
once.

Touch and hold COOKTOP POWER OFF until the indicator goes 
out. This turns off all the surface cooking areas. The hot surface 
indicator “H” stays on the display until the surface cooking areas 
have cooled down.

■

Bring liquid to a boil.

■

Start food cooking.

■

Quickly brown or sear food.

■

Hold a rapid boil.

■

Fry poultry or meat.

■

Cook soups, sauces and 
gravies.

■

Maintain a slow boil.

■

Stew or steam food.

■

Simmer

■

Melt chocolate or butter.

■

Home canning.

■

Large-diameter cookware.

A

B

A

B