Homesmart Appliance SRS-LYNC-L Benutzerhandbuch
APPENDIX C
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
120
smarttech.com/kb/170450
Room size
Procedure
Extra large room
Flick the power switch on the bottom of both interactive flat
panels.
panels.
4. Press the DELETE key.
The Lync appliance enters BIOS mode.
5. Browse to the Advanced tab.
6. Select AMT Configuration, and then press ENTER.
7. Set
Intel AMT to Enabled.
8. Press ESC.
9. Browse to the Save & Exit tab.
10. Select Save Changes and Exit, and then select Yes.
The room system restarts.
11. Press CTRL+P before the Windows startup screen appears.
Intel MEBx opens.
12. Continue to the next procedure.
To configure Intel AMT
1. Enter the default Intel AMT password (admin) when prompted, and then change the Intel AMT
password following the on-screen instructions.
2. Select Intel® AMT Configuration, and then press ENTER.
3. Select Activate Network Access, and then press ENTER.
4. Press Y.
NOTE
For information on other MEBx controls, see