Hotpoint HDA850G Benutzerhandbuch

Seite von 16
PROBLEM
POSSIBLE CAUSE AND REMEDY
CHIPPING OF CHINA
Rough handling can cause chipping. Load with care, Make sure glassware and china are
secure and can’t jar loose. (See pages 8 and 9 for correct way to load glassware.) Make
sure tall glasses and stemware 
will clear the top of the tub when you push the rack into
the dishwasher.
Always use the top rack for delicate items.
SMALL AMOUNT OF
Water around the outlet on the tub bottom at the back of the tub is normal. It is clean
WATER STANDING
water. It’s there to keep the water 
 lubricated.
IN THE 
OF THE TUB
WATER WON’T PUMP
If the entire bottom of the tub has water, you may have a drain problem. 
 the air gap,
OUT OF THE TUB
if you have one. (Seepage 11.)
Check the kitchen sink.   it draining well? You may need a plumber.
If dishwasher drains into disposer, run disposer to clear. Be sure disposer is not clogged.
SUDS IN THE TUB
 detergents are not meant for dishwashers. USE ONLY 
DISHWASHER DETERGENTS 
 AVOID 
 remove suds from the tub: 
 the 
dishwasher. Let suds evaporate. Add 
1 gallon of
cold water to the tub. Close and latch the dishwasher. Pump out water by slowly turning
the control 
 until a drain period is reached.
 if necessary.
DISHWASHER LEAKS
Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s
designed for automatic dishwashers.
If you need more help.. call, toll free:
The GE Answer 
800.626.2000
consumer information service
14