Sony MZ-R909 Benutzerhandbuch
26
If the play does not start
When using the headphones/
earphones connect them directly to
the recorder
earphones connect them directly to
the recorder
The VOL +/– buttons and the Digital Sound
Preset function may become inoperative. In this
case, do the procedure below.
Preset function may become inoperative. In this
case, do the procedure below.
1 Press the jog dial, turn the dial until
“AUDIO OUT” flashes in the display, and
then press the dial again.
then press the dial again.
2 Turn the jog dial until “HeadPhone” flashes
in the display.
3 Press the jog dial again.
z
• The playback mode will switch automatically
to match the recording mode of the material
(SP stereo, LP2 stereo, LP4 stereo, or
monaural).
(SP stereo, LP2 stereo, LP4 stereo, or
monaural).
• To play only the tracks in a certain group, see
• The volume setting can be stored to the
Personal Disc Memory (page 51).
Note
If the power supply is disrupted (i.e. the battery
is removed or becomes exhausted or the AC
power adaptor is disconnected) when the
recorder is operating, the lid may not open until
the power is restored.
is removed or becomes exhausted or the AC
power adaptor is disconnected) when the
recorder is operating, the lid may not open until
the power is restored.
3)
You can turn off the beep sound (page 73).
4)
Once you open the lid, the point to start play will change to the beginning of the first track (except when
the disc information is stored to the Personal Disc Memory).
the disc information is stored to the Personal Disc Memory).