Ryobi RY44140 Benutzerhandbuch



Use non-slip, heavy-duty protective gloves when operat-
ing the hedge trimmer and when installing or removing 
blades.



Replace any blade that has been damaged. Always make 
sure blade is installed correctly and securely fastened be-
fore each use. Failure to do so can cause serious injury.



Never cut any material over 2/3 in. diameter.



Maintain a firm grip on both handles while cutting with a 
blade. Keep the blade away from body.



Know how to stop the unit quickly in an emergency.



Do not use trimmer without front handles in place. Keep 
both hands on handles when the unit is in use.



If hedge trimmer is equipped with a debris deflector, do 
not use the debris deflector as a gripping surface.



Disconnect Hedge Trimmer — Disconnect the plug from 

power source before making any adjustments, changing 

accessories, storing the hedge trimmer, or before servic-

ing. Such preventive safety measures reduce the risk of 
starting the product accidentally.



Service on the product must be performed by qualified 
repair personnel only. Service or maintenance performed 
by unqualified personnel could result in injury to the user 
or damage to the product. 



  If the power supply cord is damaged, it must be replaced 

only by the manufacturer or by an authorized service 
center to avoid risk.



Save these instructions. Refer to them frequently and use 
them to instruct others who may use this tool. If you loan 
someone this tool, loan them these instructions also to 
prevent misuse of the product and possible injury.



Ground Fault Circuit Interrupter (GFCI) protection should 
be provided on the circuit(s) or outlet(s) to be used for the 
hedge trimmer. Receptacles are available having built-in 
GFCI protection and may be used for this measure of 
safety.



Inspect extension cords periodically and replace if 
damaged. Keep handles dry, clean, and free from oil or 
grease.



Disconnect Hedge Trimmer — Always stop the motor and 
disconnect from power supply when not in use, before 
attempting to remove any obstruction caught or jammed in 
the blade, or before removing and installing the blade.



Avoid Accidental Starting — Never carry plugged in hedge 
trimmer with finger on switch. Be sure switch is off when 
plugging in.



Maintain Hedge Trimmer With Care — Keep cutting edge 
sharp and clean for best performance and to reduce the 

risk of injury. Follow instructions for lubricating and chang-
ing accessories. Inspect hedge trimmer cord periodically 
and, if damaged, have it repaired by an authorized service 
facility. Inspect extension cords periodically and replace 
if damaged. Keep handles dry, clean, and free from oil 
and grease.



Check damaged parts — Before further use of the hedge 
trimmer, a guard or other part that is damaged should be 
carefully checked to determine that it will operate properly 
and perform its intended function. Check for alignment of 
moving parts, binding of moving parts, breakage of parts, 
mounting, and any other condition that may affect its 
operation. A guard or other part that is damaged should 
be properly repaired or replaced by an authorized service 
center unless indicated elsewhere in this manual.



SAVE THESE INSTRUCTIONS.