LevelOne FBR-1401TX Benutzerhandbuch

Introduction

11

This button has three (3) functions:
•  Reboot.  When pressed and released, the LevelOne Broadband 

Router will reboot (restart).

•  Diagnostic print-out.  If held down for 3 seconds, a diagnostic 

print-out will be sent to the attached printer. 
•  Ensure the printer is ready. 
•  Both Print LEDs will flash simultaneously during the diag-

nostic printing.

•  Clear All Data.  This button can also be used to clear ALL data 

and restore ALL settings to the factory default values.

1.

Power Off.

2.

Hold the Reset Button down while you Power On.

3.

Keep holding the Reset Button for a few seconds, until the RED 
LED has flashed TWICE.

4.

Release the Reset Button. The LevelOne Broadband Router is 
now using the factory default values.

Connect the DSL or Cable Modem here. If your modem came with a 
cable, use the supplied cable. Otherwise, use a standard LAN cable.

Use standard LAN cables (RJ45 connectors) to connect your PCs to 
these ports.

Any LAN port on the LevelOne Broadband Router will automatically
function as an "Uplink" port when required. Just connect any port to 
a normal port on the other hub, using a standard LAN cable.

Connect the supplied power adapter here.

Standard parallel printer port. If you wish to share a printer, connect it 
here.