LevelOne FBR-1401TX Benutzerhandbuch

Advanced Features

67

The port number used by Internet users when connecting to the 
Server. This is normally the same as the Internal Port Number. If it is 
different, this device will perform a "mapping" or "translation" 
function, allowing the server to use one port address, while clients 
use a different port address.

This will delete any Servers you have defined, and set the pre-
defined Servers to use their default port numbers.

This will cause the "Enable" setting of all Virtual Servers to be set 
OFF.

Add a new entry to the Virtual Server list, using the data shown in 
the "Properties" area on screen. The entry s elected in the list is 
ignored, and has no effect.

Update the current Virtual Server entry, using the data shown in the 
"Properties" area on screen.

Delete the current Virtual Server entry. Note that the pre-defined
Servers can not be deleted. Only Servers you have defined yourself 
can be deleted.

Clear all data from the "Properties" area, ready for input of a new 
Virtual Server entry.

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define 
and manage your own Servers:

1.

Click "Clear Form"

2.

Enter the required data, as described above.

3.

Click "Add".

4.

The new Server will now appear in the list.

1.

Select the desired Server from the list

2.

Make any desired changes (for example, change the 
Enable/Disable setting).

3.

Click "Update" to save changes to the selected Server.

1.

Select the entry from the list.

2.

Click "Delete".

Note:  You can only delete Servers you have defined. Pre-
defined Server cannot be deleted.