LevelOne FBR-1401TX Benutzerhandbuch

Advanced Configuration

79

Check this to enable the RIP (Routing Information Protocol) feature of 
the LevelOne Broadband Router. 

The LevelOne Broadband Router supports RIP 1 only.

This list shows all entries in the Routing Table.
•  The "Properties" area shows details of the selected item in the 

list.

•  Change any the properties as required, then click the "Update" 

button to save the changes to the selected entry.

•  Destination Network - The network address of the remote LAN 

segment. For standard class "C" LANs, the network address is 
the first 3 fields of the Destination IP Address. The 4th (last) field 
can be left at 0.

•  Network Mask - The Network Mask for the remote LAN seg-

ment. For class "C" networks, the default mask is 255.255.255.0

•  Gateway IP Address - The IP Address of the Gateway or Router 

which the LevelOne Broadband Router must use to communicate 
with the destination above. (NOT the router attached to the re-
mote segment.)

•  Metric - The number of "hops" (routers) to pass through to 

reach the remote LAN segment. The shortest path will be used. 
The default value is 1.

Save the RIP setting. This  has no effect on the Static Routing Table.