Nikon 9000ED Benutzerhandbuch

3 

Insert masking sheets
When scanning one or two strips or 
strips of different lengths, place the fi lm 
at the left end of the holder and cover 
any open apertures with the supplied 
masking sheets, cutting the sheet to the 
appropriate length if necessary.  When 
scanning one or two strips, place the 
fi lm in the bottom rows and the masking 
sheets in the top rows.

When scanning three strips of equal 
length, place the fi lm at the left end 
of the holder.  Masking sheets are not 
required.

4 

Latch the holder
Press the holder closed until the latches 
click into place.

Insert your fi ngers into the holes in the lower 
portion of the holder and undo the latches.  
Open the holder and use the cutouts to pick 
the fi lm up by its edges.  If the edges of the 
fi lm are not accessible, tilt the holder to slide 
the fi lm to the hollow at the end of the lower 
holder.

Cutouts

Hollow

Masking sheets