Fujitsu S1100 Benutzerhandbuch
When ScanSnap Manager does not operate normally
26
■ Checking if ScanSnap Manager is operating normally
1.
Turn the ScanSnap off then back on.
Make sure to leave at least five seconds between turning the power ON/OFF.
2.
If you are using a USB hub, connect the ScanSnap to the computer
directly.
3.
If an anti-virus software is running, disable the software temporarily.
4.
If there is more than one USB port on the computer, connect the USB
cable to a different USB port.
If the problem persists, proceed to
If the problem persists, proceed to
If you cannot disable the anti-virus software, check if the software is set to lock the
application.
application.
If the problem persists, proceed to
If the problem persists, proceed to