Avaya P332G-ML Benutzerhandbuch
Chapter 8
User Authentication
Avaya P332G-ML User’s Guide
41
Radius Commands
The following radius commands are accessible from Supervisor level.
For a complete description of the RADIUS CLI commands, including syntax and
output examples, refer to Avaya P330: Reference Guide.
output examples, refer to Avaya P330: Reference Guide.
In order to...
Use the following command...
Enable or disable authentication for
the P330 switch. RADIUS
authentication is disabled by
default
the P330 switch. RADIUS
authentication is disabled by
default
set radius authentication
Set a primary or secondary
RADIUS server IP address
RADIUS server IP address
set radius authentication server
Configure a character string to be
used as a “shared secret” between
the switch and the RADIUS server.
used as a “shared secret” between
the switch and the RADIUS server.
set radius authentication secret
Set the RFC 2138 approved UDP
port number.
port number.
set radius authentication udp-port
Set the number of times an access
request is sent when there is no
response
request is sent when there is no
response
set radius authentication retry-
number
number
Set the time to wait before re-
sending an access request.
sending an access request.
set radius authentication retry-time
Remove a primary or secondary
RADIUS authentication server
RADIUS authentication server
clear radius authentication server
Display all RADIUS authentication
configurations. The shared secrets
will not be displayed
configurations. The shared secrets
will not be displayed
show radius authentication