LevelOne GSW-2453 Benutzerhandbuch

 

10

 

at any time. Data path loops will cause broadcast storms that will severely impact your 

network performance. 

 

 

 

The Switch can be easily monitored through panel indicators to assist in identifying 

problems, which describes common problems you may encounter and where you can 

find possible solutions. 

 

IF the power indicator does turn on when the power cord is plugged in, you may have a 

problem with power outlet, or power cord. However, if the Switch powers off after 

running for a while check for loose power connections, power losses or surges at 

power outlet. IF you still cannot resolve the problem, contact your local dealer for 

assistance. 

 

 

 

UTP ports  use unshielded twisted-pair (UTP) or shield twisted-pair ( STP ) cable for 

RJ-45 connections: 100Ω  Category 3, 4 or 5 cable for 10Mbps connections or 100Ω 

Category 5 cable for 100Mbps connections. Also be sure that the length of any 

twisted-pair connection does not exceed 100 meters (328 feet). Gigabit port should 

use Cat-5 or cat-5e cable for 1000Mbps connections. The length does not exceed 100 

meters.