Fujitsu FS-1004EX Benutzerhandbuch

8. 

 

 

When creating cascaded connections with a previous model device (FS-104 or FS-108), make 
sure to set this device as a master. 
When creating cascaded connections with Fujitsu advanced model (FS-1004, FS-1008 or 
FS-1016), connect FS-1004EX at the slave side. (The OSD function will be effective.) 
Use 1.8m dedicated PS/2 cables. Also, there are function limitations, as stated below. 
 

<Example of cascaded connection> 

 

Slaves 

 
 
 
 
 

Master 

FS-104AT or 
FS-1004EX 

FS-108AT or 
FS-1004EX

 

FS-1004EX

 

FS-108AT or 
FS-1004EX 

FS-104AT or 
FS-1004EX

 
 

1.  Function Limitation (When the slave side is FS-104 or FS-108) 
 

A.  Switching cannot be done directly by pressing the SELECT key of the slave side. First, 

with the SELECT key of the master side, switch to the port connected to the slave side. 
 

B.  The monitor setting data cannot be saved in the slave side. To use the PnP function of the 

monitor, boot with the PC already selected. If not, disable the automatic PnP recognition 
(from the PC). 

12