Fujitsu FS-1004EX Benutzerhandbuch
5. Component Names and Their Functions
5.1 Front
a
e
b
d
c
a. [POWER] LED
Lights up when the PC is ON.
b. [SELECT] Switch
Press this switch to select the PC.
You can select a PC even if its POWER LED is not lit.
You can select a PC even if its POWER LED is not lit.
c. [SELECT] LED
Lights up when the PC is selected.
It blinks when in the Hot Key mode or being reset.
It blinks when in the Hot Key mode or being reset.
d. [RESET] Switch
Use this switch when PC selection is not possible, when the keyboard or mouse cannot be
operated, or when the monitor setting data also needs to be saved. The [SELECT] LED's
blink and PCs can be restored without being rebooted. Press it lightly with a metal pin or
something.
operated, or when the monitor setting data also needs to be saved. The [SELECT] LED's
blink and PCs can be restored without being rebooted. Press it lightly with a metal pin or
something.
e. [LOW POWER] LED
Lights up when the device cannot operate normally due to low power voltage inside the
device.
When this light is on, make sure to connect a dedicated AC adapter.
device.
When this light is on, make sure to connect a dedicated AC adapter.
6