GE 82-POE Benutzerhandbuch
Chapter 6: Command Line Interface
172
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
MAC limit
MAC limit allows users to set a maximum number of MAC addresses to be stored in
the MAC address table. The MAC addresses chosen to be stored in MAC address table
is the result of first-come-first-save policy. Once a MAC address is stored in the MAC
address table, it stays in until it is aged out. When an “opening” is available, the
switch stored the first new MAC address it sees in that opening. All packets from MAC
addresses not in the MAC address table should be blocked.
User can configure the MAC limit setting and fill in the new value.
mac-limit
Description:
Enable MAC limit.
no mac-limit
Description:
Disable MAC limit.
Mac-limit
Description:
Set port MAC limit value, 0 to turn off MAC limit of port.
Syntax:
Mac-limit <port-list> <1-64>
show mac-limit
Description:
Show MAC limit information, including MAC limit enable/disable, per-port MAC limit
setting.
the MAC address table. The MAC addresses chosen to be stored in MAC address table
is the result of first-come-first-save policy. Once a MAC address is stored in the MAC
address table, it stays in until it is aged out. When an “opening” is available, the
switch stored the first new MAC address it sees in that opening. All packets from MAC
addresses not in the MAC address table should be blocked.
User can configure the MAC limit setting and fill in the new value.
mac-limit
Description:
Enable MAC limit.
no mac-limit
Description:
Disable MAC limit.
Mac-limit
Description:
Set port MAC limit value, 0 to turn off MAC limit of port.
Syntax:
Mac-limit <port-list> <1-64>
show mac-limit
Description:
Show MAC limit information, including MAC limit enable/disable, per-port MAC limit
setting.