GE 82-POE Benutzerhandbuch
Chapter 4: Web-Based Management
90
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Figure 61: RSTP System Configuration interface
This page includes the following fields:
OBJECT DESCRIPTION
RSTP mode
The user must enable the RSTP function first before configuring the
related parameters.
related parameters.
Protocol Version
A value used to specify the spanning tree protocol, the original
spanning tree protocol (STP, 802.1d) or the rapid spanning tree protocol
(RSTP, 802.1w).
spanning tree protocol (STP, 802.1d) or the rapid spanning tree protocol
(RSTP, 802.1w).
Priority (0-61440)
The switch with the lowest value has the highest priority and is selected
as the root. If the value is changed, the user must reboot the switch.
as the root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol
standard rule.
standard rule.
Max Age (6-40)
The number of seconds a switch waits without receiving Spanning-tree
Protocol configuration messages before attempting a reconfiguration.
Protocol configuration messages before attempting a reconfiguration.
Enter a value between 6 through 40.
Hello Time (1-10)
The time that controls the switch to send out the BPDU packet to check
RSTP current status.
RSTP current status.
Enter a value between 1 through 10.
Forward Delay Time (4-30)
The number of seconds a port waits before changing from its Rapid
Spanning-Tree Protocol learning and listening states to the forwarding
state.
Spanning-Tree Protocol learning and listening states to the forwarding
state.
Enter a value between 4 through 30.