Rose electronic 2xE Benutzerhandbuch

The following instructions apply to all UltraMatrix switches. 
 
This section explains the operating functions of the on-screen displays, 
the login procedure, connect procedure and other commands needed 
to easily use the UltraMatrix switch and its capabilities. 
 
To start using your UltraMatrix switch, you first need to become familiar 
with the keyboard commands. The available keyboard commands are 
shown in Table 1.  All keyboard commands start with an attention 
sequence by pressing and releasing the left [Ctrl] key, then the 
additional command characters.  The additional command characters 
must be entered within two seconds of each other or the command is 
aborted. 
 
Commands are not case sensitive and are shown in upper or lower 
case for clarity only. Do not use the [SHIFT] key or the numeric keypad 
to enter any commands. [Ctrl]  in Table 1’s, Key Sequence column is a 
press and release function of the left [Ctrl] key. 
 

 

 

Main Menu 

[Ctrl]  [F12] 

Displays main menu  

CPU List 

[Ctrl]  [Esc] 

Displays CPU selection list  

Direct CPU 
connect 

[Ctrl]  n  [Enter] 

Connects directly to the specific 
CPU number “n”. 

Connect Back  [Ctrl]  [Backspace] 

Connects to the previous CPU 

Connect Down  [Ctrl]  [Minus sign] 

Connects to the previous CPU 
in a Group. 

Connect Up 

[Ctrl]  [Plus sign] 

Connects to the next sequential 
CPU in a group 

KVM Status 

[Ctrl]  D 

Displays / Removes status box. 

Logout 

[Ctrl] L 

Logs user out if the KVM station 
is configured for user logins. 

Disconnect 

[Ctrl] Q 

Disconnects the current CPU 

Reset 
Keyboard/ 
mouse 

[Ctrl] R 

Resets / enables keyboard and 
mouse; enables PS/2 mouse on 
connected CPU