Avaya P460 Benutzerhandbuch
Chapter 4
Avaya P460 Layer 2 Features
Redundancy CLI Commands
In order to...
Use the following command...
Define/delete a redundancy entry.
Enable port redundancy on the
switch
switch
Disable port redundancy on the
switch
switch
Set the minimum time that is
elapses before a Primary-Backup
switchover and the minimum time
the Primary port link has to be up
before a switch-back to the Primary
port takes place
elapses before a Primary-Backup
switchover and the minimum time
the Primary port link has to be up
before a switch-back to the Primary
port takes place
Show port redundancy
configuration
configuration
• When you remove an I/O module, the port redundancy configurations are
retained.
• If you replace the I/O module with the same type, redundancy will be re-
established.
• If you replace the I/O module with a different type, the redundancy
configuration will be restored to the default values.
• Any new redundancy definitions over-ride the retained configuration.
32
Avaya P460 Configuration Guide