3M 800ab Benutzerhandbuch
6
3.3 Table of Warnings
•
To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety
and operating instructions before operating
or servicing the case sealer.
or servicing the case sealer.
− Allow only properly trained and
qualifi ed personnel to operate and service
this equipment.
this equipment.
WARNING
•
To reduce the risk associated with
hazardous voltage:
− Position electrical cord away from foot
and vehicle traffi c.
WARNING
•
To reduce the risk associated with
pinches, entanglement and
hazardous
voltage:
−
Turn electrical supply off and
disconnect before performing any
adjustments, maintenance or servicing
the machine or taping heads.
WARNING
•
To reduce the risk associated with
pinches and entanglement hazards:
−
Do not leave the machine running
while
unattended.
−
Turn the machine off when not in use.
−
Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
WARNING
3-SAFETY (continued)
2010 December
800ab-NA
Figure 3-2
IMPORTANT!
Cavity in the conveyor bed. Never put
your hands inside any part of the machine while it is
working
working
. Serious injury may occur (Figure 3-4).
E-Stop
Switch
Figure 3-3
Figure 3-4